V6

V&T V6-H series is a high performance sensor vector control VFD and torque control inverter.The product adopts close-loop vector control technology and torque control technology which are synchronized with the current international advanced technology, and it has the same excellent control performance with the international high-end frequency drive.

Yêu cầu báo giá Liên hệ

Three phase AC VFD Open loop vector, Closed loop vector, Open loop torque, Closed loop torque control
Inverter operates stably without tripping under any acceleration and deceleration time and any impact load
Real torque control is realized through the independent current loop control, and online switching between torque control and speed control is supported
Independent input and output port of high speed pulse, which can realize high speed pulse cascade function
Accurate speed identification and rotor flux orientation, the torque can also respond quickly and operate stably when a load of 0.25hz breaks
High-precision current detection and protection, high-precision hall to detect output current, realization of fast real-time control and protection of software and hardware, and assurance of performance and reliability of the whole machine
Overload Tolerance 150% 1 minute, 180% 10 seconds, 200% 0.5 second, interval: 10 minutes (inverse time lag feature)

Allowable voltage range: Three−phase, 200 to 240Vac, 380 to 480Vac (− 15% to +10%) 50/60 Hz (± 5%)
Control mode: V/F Control, Vector Control, Sensorless Vector Control, Sensor Vector Control, Vector Torque Control
Frequency range: 0.00 ~ 300.00Hz
Precision of steady speed: ± 0.5%
Starting torque: 0.50Hz 180%
Overload capacity: 150% 1 minute, 180% 10 seconds, 200% 0.5 second, interval: 10 minutes (inverse time lag feature)
Power (kW): 0.4-560kW
Rated current Output (A): 3-17 A (200 V), 2.5-950 A (400V)
Key functions: Under-voltage regulation, switchover of run command source(operation panel, terminal and communication), speed tracing function, torque limit, multi− step frequency reference(up to 23 step frequency), motor data identification, S curve acceleration and deceleration, slip compensation, PID regulation, droop control, current limit, switch-over between torque control and speed control, manual torque boost and auto torque boost, programmable digital inputs and programmable digital outputs.
Frequency reference mode: Parameter setting, operation panel UP/DN, terminal, terminal UP/DN, communication, analog ( AI1/AI2/AI3), pulse DI, etc
Acceleration time and deceleration time: 0.1~36000s
Dual 485 communication ports: Dual 485 communication ports support Modbus protocol (RTU). The maximum distance is 500 meters

Model	Normal Duty		Heavy Duty
Model	Rated Output Current (A)	Capacity (KW)	Rated Output Current (A)	Capacity (KW)
Three-Phase 200 V Class
V6-H-2T0.4G			3	0.4
V6-H-2T0.75G			5	0.75
V6-H-2T1.5G			7.5	1.5
V6-H-2T2.2G			10	2.2
Three-Phase 400 V Class
V6-H-4T0.75G/1.5L-HW	3.3	1.5	2.5	0.75
V6-H-4T1.5G/2.2L-HW	5	2.2	3.8	1.5
V6-H-4T2.2G/3.7L-HW	7.5	3.7	5.5	2.2
V6-H-4T3.7G/5.5L-HW	11	5.5	9	3.7
V6-H-4T5.5G/7.5L-HW	17	7.5	13	5.5
V6-H-4T7.5G/11L-HW	22	11	17	7.5
V6-H-4T11G/15L-HW	30	15	24	11
V6-H-4T15G/18.5L-HW	37	18.5	30	15
V6-H-4T18.5GA/22LA-HW	44	22	39	18.5
V6-H-4T22GA/30LA-HW	56	30	45	22
V6-H-4T30GA/37LA-HW	72	37	60	30
V6-H-4T37GA/45LA-HW	91	45	75	37
V6-H-4T45GA/55LA-HW	110	55	91	45
V6-H-4T55GA/75LA-HW	142	75	112	55
V6-H-4T75GA/90LA-HW	176	90	150	75
V6-H-4T90G/110L-HW	210	110	176	90
V6-H-4T110G/132L-HW	253	132	210	110
V6-H-4T132G/160L-HW	304	160	253	132
V6-H-4T160G/185L-HW	350	185	304	160
V6-H-4T185G/200L-HW	380	200	350	185
V6-H-4T200G/220L-HW	426	220	380	200
V6-H-4T220G/250L-HW	470	250	426	220
V6-H-4T250G/280L-HW	520	280	470	250
V6-H-4T280G/315L-HW	600	315	520	280
V6-H-4T315G/355L-HW	650	355	600	315
V6-H-4T355G/400L-HW	690	400	650	355
V6-H-4T400G/450L-HW	775	450	690	400
V6-H-4T450G/500L-HW	860	500	775	450
V6-H-4T500G/560L-HW	950	560	860	500