S210

The SINAMICS S210 system comprises a servo converter and a servomotor – and mainly addresses solutions demanding a high dynamic performance in the power range from 50 W to 7 kW. Machine safety functions are integrated. The connection to a higher controller is established via PROFINET IRT communication, fast commissioning via the TIA Portal or the integrated web server and One Button Tuning.

Yêu cầu báo giá Liên hệ

Easy commissioning using a web server and One Button Tuning

Integrated web server allows the drive to be commissioned and fully diagnosed without requiring any additional software
The PLC can directly access the web server in the converter via PROFINET
One Button Tuning with selectable dynamic levels to adapt the converter to the required machine dynamics allows the controller settings to be simply optimized
Coming soon: Commissioning via TIA Portal

Optimized connection system using OCC (one cable connection)

Only one single cable is required to connect the motor and servo drive (motor power, encoder and brake)
Time is shortened and space saved as only one cable needs to be installed
The motor is compact with a small rotatable connector for simple installation and mounting even when space is restricted
Thin OCC for small bending radii ensures simple cable installation

SIMOTICS S-1FK2 motors for increased performance

Low moment of inertia facilitates significantly higher cycle rates
High resolution encoder with fast sampling for stable and precise closed-loop control
Automatic converter parameterization using the electronic motor type plate

Integrated safety functions

As standard: STO (Safe Torque Off), SS1 (Safe Stop 1) and SBC (Safe Brake Control)
SS2 (Safe Stop 2), SOS (Safe Operating Stop), SLS (Safely Limited Speed), SSM (Safe Speed Monitor), SDI (Safe Direction) and SBT (Safe Brake Test)
Controlling the integrated safety functions via PROFIsafe, STO or SS1 also via terminal
Coming soon: Integrated safety acceptance test for safety functions

Reduced engineering time with SIMATIC S7-1500 / T-CPU

Motion control functions through Technology Objects, e.g. positioning or cams, facilitate engineering that is perfectly coordinated with the converter
Tested application example for connecting the servo drive system to a SIMATIC control available at www.siemens.com/sinamics-applications

Can be used around the world

SINAMICS S210, SIMOTICS S-1FK2 and Motion Connect cables comply with all of the usual certifications—including UL-certified /recognized for North America

Type: Servo drive system
Application: Discontinuous processing / moving
Power range:

1AC 230V: 0.05–0.75 kW
3AC 200-480V up to 7kW

Torque range: 1AC 230V: 0.16–2.4 Nm
Communications: PROFINET / PROFIsafe
Safety functions: STO, SS1, SBC (SS2, SOS, SLS, SSM, SDI, SBT)
Commissioning / engineering: Web server/ Startdrive
TIA portal integrations: GSD/full integration
EMC filters: Integrated (1AC 230V: Class C2)
Standards: CE, cULus, cURus, EAC, RCM
Motor connection systems: One Cable Connection (OCC) with SPEED-CONNECT fast connection system
and compact, rotatable connector, permissible cable length: 50 m
Typical controls: SIMATIC S7-1500 / SIMATIC S7-1500 T-CPU
Mechanical designs: Single-axis converter, compact design
Motor versions:

Version with low moment of inertia (high-dynamic) and with shaft heights 20–40 mm
Version with average rotor moment of inertia (compact) in shaft heights 30 mm