Nidec F600 Inverter

The Nidec F600 inverter is a dedicated, energy-saving, and intelligent solution for pump and fan applications. The product is equipped with many advanced features to help your business save energy, improve operating efficiency, and extend equipment life.

Outstanding features of the Nidec F600 inverter

High-performance and energy-saving

The Nidec F600 inverter is up to 98% efficient, minimizing energy loss during power conversion. Furthermore, the F600’s true energy-saving potential is maximized by built-in features that reduce power consumption:

• The F600 is equipped with the Low Load Power Saving feature, which, when activated, will automatically reduce the input voltage, helping to reduce motor losses and improve system efficiency.
• Sleep Mode: When the system is operating with low or unnecessary load, the F600 inverter will automatically enter sleep mode to save energy. When the load increases again, the inverter will automatically start up. This will make the device operate more efficiently and prolong its life.

Flexible operation and system protection

As mentioned, the Nidec F600 inverter is a line of inverters specifically designed for pump and fan applications. Therefore, the product is equipped with many features to ensure the pump & fan system operates most efficiently and optimally.

• Pipe Fill: Helps prevent sudden pressure surges at start-up by using controlled acceleration, protecting the piping system and pump.
• Built-in standard units of measurement for flow, pressure, or other feedback devices to suit the specific application.
• Dry-Run Prevention: Allows the driver to check the motor load against the set threshold to avoid the pump running dry. In addition, users can flexibly adjust, such as reducing output, triggering warnings, or stopping the drive when needed.
• Over-Cycling Protection: By limiting the number of starts/stops per hour, users can optimize the size of the drive, motor, and pump. At the same time, the cycle threshold can be flexibly adjusted, warnings can be set, or the drive can be stopped when the limit is reached.
• No-flow detection function: When there is no or low flow, the F600 can automatically enter sleep mode to save energy. Users can activate this function based on the pulse flow sensor, switch, or control software.
• Self-cleaning function: The F600 inverter will automatically monitor the system in real-time to activate the self-cleaning cycle, helping to remove dirt on the pump blades, reduce maintenance costs, and limit clogging.
• Level switch control function: When the water level is high, the inverter will stop the pump to avoid overflow. When the water level is low, the inverter will start the pump to ensure the water level in the tank is maintained.
• Flow compensation function: Helps save energy in large water supply systems (irrigation systems) where the pressure sensor is installed close to the pump instead of far from the pipe.

Easy integration & smart control

Nidec F600 inverter supports many industrial communication protocols such as Modbus RTU, BACnet, CANopen, Ethernet/IP, PROFINET, and PROFIBUS, and is easy to integrate into automation systems.

In addition, the product also integrates an intuitive HMI screen that is easy to configure with Connect software.

F600 inverter meets safety standards IEC 61800-5-1, UL 508C, EN 61000-3-12.

Applications of Nidec F600 inverter

With high efficiency, energy saving, and advanced protection features, the Nidec F600 inverter is ideal for pump and fan systems in all industrial fields.

• HVAC System
• Controlling industrial water pumps in water supply and drainage systems, wastewater treatment, and irrigation systems.
• Controlling industrial fans in ventilation and cooling systems in factories and workshops.
• Controlling pressure and pump flow in the production of oil, gas, and chemicals.

If you are looking for an optimal inverter solution, do not hesitate to contact Nam Phuong Viet for detailed advice on the Nidec F600 inverter!