Flyer
More Documents- PLC & HMI control cabinets are used to centrally control and monitor the operation and energy consumption of equipment in a building, factory,…
- Electrical cabinets meet domestic and international standards
- The equipment and accessories used in the cabinet are selected in accordance with the needs of use, ensuring safety and efficiency during operation.
- The electrical cabinet cover is aesthetically designed, easy to install and operate, maintain and maintain.
- The cabinet is programmed and controlled on PLC
- Monitoring on HMI, Scada
- Analyze and issue warnings about problems on the system to users
- Read all external signals from sensors, limit switches,…
- Scope of use: Factory, Building, Trade center,…
PLC & HMI Panel
PLC & HMI are designed and manufactured by Nam Phuong Viet in accordance with domestic and international standards. Monitor the energy and operation of equipment in a factory, building, etc.
Mechanical Specifications:
- Form of cabinets: Form 1/2a/2b/3a/3b
- Degree of protection: IP 20/31/32/42/54
- Material: Steel plate/SUS
- Material thickness: 1.2mm ~ 2.0mm
- Paint color code: RAL7032/RAL7035/hairline/according to customer requirements
- Coating thickness: Min 50μ
- Installation type: vertical/wall mounted type
- Installation location: Indoor/Outdoor
- Cable exposure: top and bottom
- Dimensions of the cabinet: H x W x D depending on the schematic diagram of each project
Electrical Specifications:
- Main equipment: Eaton/Mitsubishi/Schneider/Siemens/other,…
- Applicable standards: IEC 61439-1/2
- Frequency: 50/60Hz
- Rated insulation voltage (Ui): 690V
- Rated operating voltage (Ue): 220/380/415VAC
- Control voltage: 220VAC/24VDC
- Rated pulse voltage (Uimp): 8kV
- Rated current (In): up to 1000A
- Peak pulse current (Ipk): up to 100kA
- Resistance to short circuit current over time (Icw): up to 100kA/3s
- Input signal: Analog/Dry contact,…
- Monitoring type: spot, centralized
